Load Shedding
Load Shedding - What Is It?
Load shedding is the process of rationing a limited power supply among competing electrical demands. Interrupting power to a non-priority load allows continued service to priority demands. Such as hot water heating.
| Temperature Rise (°F) | ||||||||||||||
| Voltage | Power (kW) | Supply Circuits Required | Recommended Wire Size | Turn-On(GPM) | Max Effective Flow (GPM) | NPT Fittings | At 1.5 GPM (F) | At 2 GPM (F) | At 2.5 GPM (F) | At 3 GPM (F) | At 4 GPM (F) | At 5 GPM (F) | At 6 GPM (F) | |
| EX144TC LS | 240V | 15 | 64 (2X32) A | 8 AWG | 0.7 | 3 | 3/4” | 68° | 51° | 41° | 34° | – | – | – |
| EX190TC LS | 240V | 19 | 80 (2X40) A | 8 AWG | 0.7 | 3 | 3/4” | 87° | 65° | 52° | 43° | – | – | – |
| EX280T2T LS | 240V | 28.5 | 120 (3X40) A | 8 AWG | 0.7 | 4 | 3/4” | – | 98° | 76° | 65° | 49° | – | – |
| EX380T2T LS | 240V | 38 | 160 (4X40) A | 8 AWG | 0.9 | 6 | 3/4” | – | – | 103° | 86° | 65° | 52° | 43° |
HOW IT WORKS
When hot water is needed, the Eemax water heater sends a signal to an enclosed device. The Electric Load Shedding device will delay activation of the tankless hot water heater for up to 20 seconds (adjustable). The Electric Load Shedding device will interrupt a signal from a low voltage device, (i.e., thermostat) disabling a non-priority load, (i.e., A/C, heat pump) from turning on while the water heater is in use. This sequence allows better utilization of existing electircal infrastructure and allow the use of 99% efficient electric tankless solutions from Eemax.
FEATURES
- Load Shedding Technology – Manages power with other high amperage devices
- Cut Energy Waste – Flow switch activates heater only on demand.
- 99% Energy-Efficient
- Compact Design – No need for bulky tank.
- Ease of Installation – No T & P valve needed check local codes).
- Hot or Cold Water Feed
- Thermostatically Controlled – 100 to 140°.
- High Quality Stainless Steel Exterior
Our Tankless Products Proudly Made in the USA
