Cut energy waste - Flow switch activates heater only when water is running, no standby heat loss
99% Efficient, .99 energy factor
Endless hot water - No storage capacity to deplete
Reduces installation cost and material - No T&P valve required (check local codes)
Adjustable temperature display from 80 to 140 degrees
Easy Installation - Simple NPT fittings that require no soldering. Unit mounts directly to the wall with common hardware.
Prevents Legionella bacteria growth
Reduces calcification and sedimentation
Field Serviceable - All major component are field replaceable and readily available
Copper heating elements with brass termination to increase durability; threaded for easy replacement
Bathroom and kitchen sinks
Showers
Apartment buildings
Point-of-use
Whole house
Booster for a pre-existing tank
Any remote sink that does not have hot water
Sizing - Size based on performance and not electrical infrastructure. Three key factors, incoming water temperature, water volume, and desired outlet temperature.
Electrical - All Eemax Tankless Water Heaters are designed to be hardwire to a dedicated circuit breaker and are not supplied with a cord and plug
Plumbing - Pre-heated or Cold water feed . This family of Eemax products has an external display with thermostatic control and is capable of reacting to changing temperatures while providing stable output.
Local Codes - Please check all applicable codes, national and local to ensure compliance both on the plumbing and electrical installation
Mounting - The HomeAdvantage 18kW, 24kW, 27kW, and 36kW are to be mounted vertically with the water connections on the bottom. Inlet is on the right, outlet is on the left. This can not be reversed. The smaller HomeAdvantage 8kW, 11kW, and 13kW are to be mounted vertically with the water connections on the left and right. The inlet is on the right, outlet is on the left. This can not be reversed.